We fix what's broken, fast, and we don't disappear after the invoice. Emergency dispatch available across Mill Valley and the surrounding zip codes.
Our Mill Valley dispatcher asks a few quick questions to gauge urgency and get you the fastest available window.
You'll get a flat-rate quote before any repair work begins — no guessing what the final bill will look like.
If anything feels off after we leave, a follow-up call gets a technician back out to make it right.
Leonard HVAC didn't start as a franchise chasing volume. Our crews carry manufacturer certifications across the major residential and commercial equipment lines.
You won't find us buried under layers of call-center scripts — we're the team that shows up in the truck, not a subcontractor we've never met. Licensing and insurance aren't optional line items for us, and we keep that documentation available on request for every job, routine or emergency.
Mill Valley's climate swings hard, and generic national playbooks don't always fit. That local knowledge shapes how we diagnose problems — it's the difference between a tech who's guessing and a tech who's seen your exact situation a hundred times before.
Trust in this industry gets eroded fast, and it takes real consistency to earn it back. That's the gap we built Leonard HVAC to close. We'd rather lose a job to a lower bid than win one by cutting corners on the diagnosis, because a customer who trusts us once tends to call us again — and Mill Valley is a small enough community that reputation travels fast.
That local context saves time on every call, because we're not starting from zero on basic questions about your neighborhood or your system. It also means faster escalation when something's urgent — a local dispatcher can reroute the nearest truck in minutes, not hours.
We cover the full range of heating, cooling, and air quality work Mill Valley properties actually need.
Breakdowns rarely happen at a convenient time, which is exactly why our emergency line runs 24 hours a day. Our Mill Valley dispatch team prioritizes no-heat and no-cooling calls so a technician is diagnosing your system as fast as physically possible.
If a specialty part genuinely does need to be ordered, we'll set up a safe temporary fix and give you a real timeline instead of leaving you guessing.
Not every repair call ends in a repair — sometimes the honest recommendation is a properly sized replacement. We walk Mill Valley homeowners through load calculations so the new system is sized correctly for the actual square footage before a single piece of equipment gets ordered.
We protect floors and entryways during the install and haul away the old equipment so you're not left dealing with disposal.
Downtime in a commercial space costs money every hour a system is offline. Our commercial division services light industrial and warehouse ventilation across Mill Valley, with service agreements built around your operating hours.
Our commercial techs are trained to work around your customers and staff, scheduling noisy or disruptive work outside peak hours whenever possible.
Preventive maintenance is the cheapest repair you'll ever pay for, because it's the one that prevents the bigger bill. Beyond standard tune-ups, we also handle humidifier, dehumidifier, and air purifier installation for Mill Valley households that want more than just temperature control.
A tune-up typically takes under an hour and covers the checkpoints most likely to catch a problem before it becomes a breakdown.
This is the standard every Mill Valley technician on our team is held to.
Details vary by job type and are always shared upfront, never buried in fine print.
We quote a flat rate before work begins and that number doesn't change once you approve it.
A technician doesn't consider the job done until the system is tested and performing correctly.
Most breakdowns don't happen without warning — they announce themselves for weeks before the system actually quits.
Rattling during startup often means a component has worked itself loose and needs tightening before it causes real damage.
Weak airflow from the vents often traces back to a clogged filter, a failing blower motor, or leaking ductwork.
A system working harder than it should to hit the same temperature shows up directly on your utility bill.
A system that won't hold a steady cycle is often fighting a sizing issue, a thermostat problem, or a refrigerant imbalance.
A burning smell should never be ignored — it can indicate an electrical issue that needs immediate attention.
If you're calling about the same problem every few months, the underlying cause likely hasn't been fully addressed.
No inflated "emergency surcharge" games — the number we quote is the number you pay.
Emergency calls get moved to the front of the line automatically.
If something isn't right after we leave, we come back and make it right.
Our techs recognize brand-specific quirks instead of learning your system on the job.
Photos and plain-language notes accompany every diagnostic.
Replacement systems don't have to be paid in one lump sum.
Every review below reflects an actual service call in the Mill Valley area.
"The furnace stopped working overnight and someone was at our door before 9am. The pricing was exactly what they quoted over the phone."
"We've used them for our maintenance plan for two years now and never had a surprise breakdown. You can tell these guys actually know what they're doing."
"They handled the whole install in a single day, exactly like they said they would. Followed up a week later just to check everything was still running fine."
"Commercial dispatch was quick and the tech understood our system without needing to be walked through it. Kept our kitchen running through the weekend rush."
"The estimate matched the final invoice exactly, down to the dollar. Would use them again without hesitation."
"Diagnosed a failed capacitor and had it swapped within the hour. No overnight surcharge shock — the price matched what dispatch quoted me on the phone."
None of these are unusual or embarrassing — they're just the normal wear and tear that comes with running a system through Mill Valley's seasonal swings.
Homeowners who schedule a tune-up ahead of each season tend to call us far less often for emergency repairs. Filters should be checked monthly during heavy-use seasons and replaced roughly every 60-90 days depending on your household and any pets.
Setting a programmable or smart thermostat to a consistent schedule reduces the number of times the system has to work hard to catch up to a big temperature swing. None of this replaces a professional tune-up, but it does reduce the wear that leads to premature breakdowns between visits.
Whether your Mill Valley home has a traditional split system, a ductless mini-split, a heat pump, or a hybrid dual-fuel setup, our crews are equipped to diagnose and repair it. If your system was installed by a different company entirely, that's not a problem — we service equipment regardless of who originally put it in, and we'll pull the model and serial information to confirm parts compatibility before any repair begins.
We don't outsource dispatch to a call center that's never met our technicians.
Over a decade in residential heating and cooling, with a focus on load calculations and full system replacements.
Keeps the emergency truck stocked based on what actually fails most often locally.
Experienced with the light industrial and retail equipment common across the area.
For emergency no-heat or no-cool calls, we prioritize dispatch and aim to have a technician on-site the same day, often within a couple of hours.
We explain the diagnostic fee upfront and provide a flat-rate repair quote once the issue is identified.
Our emergency line runs 24 hours a day, including nights, weekends, and holidays.
Yes — licensing and insurance documentation is available on request for any job, residential or commercial.
As a general guideline, if a system is past 12-15 years old and facing a costly repair, replacement often makes more financial sense.
Yes, our maintenance plans include seasonal tune-ups, priority scheduling, and discounted repair rates for members.
We cover Mill Valley and the surrounding communities, including the zip codes listed in our coverage section below.
Yes, we run separate residential and commercial divisions, both fully licensed and equipped for their respective equipment.
If parts require special ordering for a less common brand, we'll communicate that timeline upfront.
Financing options are available for qualifying replacement installations, and our team can walk you through what's currently offered.
Twice-yearly maintenance is the standard we recommend given the temperature swings the area sees.
If you smell gas or burning, shut off the system at the breaker and step outside, then call us immediately.
We'd rather quote it honestly on the phone than have you feel ambushed by the bill.
Straightforward fixes like a capacitor swap or a thermostat replacement are often finished in well under an hour.
For most residential visits, yes, an adult should be present to grant access and approve any quoted work.
From the older, established streets near the center of Mill Valley to the newer developments on the outskirts, our trucks cover the full footprint of the city.
Larger properties get the same upfront pricing and licensed technicians as a single-family service call, just coordinated at scale.
We accept standard payment methods for repairs and smaller jobs, and we'll always tell you upfront what a given service is likely to cost so there's no last-minute scramble to figure out payment. If a rebate or local incentive program applies to your Mill Valley installation, our technicians will flag it during the estimate rather than leaving you to track it down after the fact.
Coverage extends across Mill Valley proper and into the nearby zip codes listed below.
Coverage isn't limited to a single neighborhood or subdivision — our Mill Valley dispatch zone stretches across the metro area and into the surrounding suburbs and unincorporated communities.
